
General Dentistry FAQ: Fillings, Crowns, Bridges and Early Decay
The short answer
Short answers to common questions about everyday dental care, with the trade-offs included.
Everyday dental care raises plenty of questions. This page answers them for fillings, crowns, bridges, inlays and onlays. It also covers enamel wear, jaw clicking, extractions and early decay, including Curodont. Each answer is short and plain, with the trade-offs and questions to ask your dentist.
Key takeaways
- Early decay can be stopped or reversed before a cavity forms.
- A bridge is a fixed replacement for one or more missing teeth.
- Experts advise conservative care for jaw joint problems.
7 questions
General dentistry FAQ: fillings, crowns and bridges
Restorations repair or replace tooth structure, from small fillings to crowns and bridges.
What is a dental filling?
A filling repairs a tooth where decay or damage has left a cavity. The dentist removes the decayed part and fills the space with a material such as tooth-colored composite, metal alloy or porcelain. Fillings are the usual way dentists treat cavities.
The NIDCR explains that decay starts when minerals are lost from enamel faster than they're restored. At first a white spot may appear. At that early stage, fluoride can stop or reverse the damage. Once a hole forms, a filling is needed. Small fillings are usually done in one visit. Larger damage may need an inlay, onlay or crown instead.
What is a root canal?
A root canal is a procedure that saves an infected or dying tooth. It removes the damaged nerve tissue and bacteria from inside, after the area is numbed. The inside is cleaned, disinfected and sealed, and a crown or other restoration usually follows.
MedlinePlus says the treatment is needed once infection reaches the pulp, typically after a crack, deep decay or an injury. Watch for pain and swelling. Left untreated, the tooth can deteriorate until it must be pulled. Expect some soreness afterward, and spare that side from hard chewing until the last filling or crown is in.
Does a filling hurt?
Usually not much. The area is numbed with a local anesthetic, often after a numbing gel, so you feel pressure rather than pain. Pain that keeps getting worse should be checked.
The ADA describes local anesthesia as medicine that blocks the nerves that sense pain, numbing the area during treatment. Fillings, crown preps and gum treatment all use it. Some procedures call for a pain reliever later. Feeling returns within a few hours, so go easy on your cheek and tongue until then. Speak up if anything feels sharp during treatment.
What is a dental bridge?
A dental bridge replaces one or more missing teeth with false teeth anchored to neighboring teeth or implants. The false tooth is called a pontic, and it's held by crowns on either side. A bridge is fixed in place, so you don't take it out like a partial denture.
The ADA's dental terminology calls a bridge a fixed partial denture. A traditional bridge needs the neighboring teeth shaped for crowns. A resin-bonded version, sometimes called a Maryland bridge, uses wings bonded to the back of the neighboring teeth. Implants are another way to support a bridge without involving natural teeth. Ask how each option affects the teeth next to the gap.
What are dental inlays and onlays?
Inlays and onlays are restorations made outside the mouth and then cemented into a prepared tooth. They're often made in a lab from ceramic or metal. An inlay fits within the tooth's cusps. An onlay also covers one or more cusps. They sit between a filling and a crown.
The ADA's terminology describes an inlay as a restoration made outside the tooth to match the prepared cavity, and an onlay as covering one or more cusp tips, not the whole tooth. Because they're made to fit, they suit larger damage than a filling can handle. They keep more natural tooth than a crown. Your dentist can explain which fits the damage.
What is crown lengthening?
Crown lengthening is a minor surgery that exposes more of a tooth. It moves the gum line and, when needed, reshapes the bone beneath. It's used to make room for a crown or filling. A similar approach can help even out a gummy smile.
The ADA's dental terminology describes crown lengthening as exposing more tooth for restorative purposes by repositioning the gum margin and removing supporting bone. It's done under local anesthesia, and the gums need time to heal before a final crown is placed. Ask how long healing will take before the next step. Your dentist will check the gums before moving on.
What is zirconia used for in dentistry?
Zirconia is a strong, tooth-colored ceramic used for crowns, bridges and implant-supported teeth. It's also one of the ceramics studied for veneers. Its strength makes it a common choice for back teeth and full-arch bridges. Other ceramics may look more natural on front teeth.
A 2026 umbrella review of full-arch implant bridges found monolithic zirconia frameworks had fewer technical complications. A 2025 review of veneer ceramics compared several materials, including zirconia, and found lithium disilicate slightly ahead of other glass ceramics on complications. Material choice depends on the tooth, your bite and how it needs to look. Ask why a given material is proposed.
7 questions
What should I know about enamel, wear and my bite?
Enamel protects teeth, and grinding, acids and an uneven bite can wear it down.
What is tooth enamel?
Enamel is the hard, mineral outer layer that covers the crown of each tooth and protects the softer dentin underneath. It can be weakened by acids from bacteria and food. Enamel can repair early damage with minerals from saliva and fluoride, but deeper losses need treatment.
The ADA explains that bacteria release acids when they feed on sugars, and those acids attack enamel. Fluoride helps repair that damage through remineralization. The NIDCR adds that early decay can be stopped or reversed, but once more minerals are lost than restored, a cavity forms. Brushing with fluoride toothpaste and limiting sugary snacks protect enamel. Regular checkups catch weak spots early.
What is tooth wear?
Tooth wear is the gradual loss of tooth surface over time. Grinding and clenching flatten or chip the edges, and acids from food, drink or reflux can soften enamel. Some wear comes with age.
The ADA notes dentists and hygienists are often first to spot grinding, from chipped or cracked teeth or worn spots along the edges. Many people grind without knowing it, especially during sleep. Finding the cause matters, since grinding can be linked to stress, sleep problems or a bite that doesn't line up. Ask whether worn edges need repair.
How is gum recession treated?
Treatment depends on the cause, and it aims to stop recession from getting worse. Cleveland Clinic notes receded gums can't be reversed. Mild cases may improve with nonsurgical care such as topical antibiotics, bonding over the exposed root or orthodontics. A gum graft is another option.
Cleveland Clinic lists brushing too hard or too aggressively among the causes, and gum disease is another common one. Because the fix follows the cause, the first step is an exam that measures the gum line and looks for gum disease. If brushing pressure is part of the problem, a softer brush and a gentler technique help protect the gums from here on.
What should I do if I think I grind my teeth?
Tell your dentist, who can look for signs such as chipped or cracked teeth or worn spots along the edges. Dr. Faraz Farahnik, DDS (Dr. Raz) can tell you whether a custom night guard would help.
What is occlusion in dental terms?
Occlusion is how your upper and lower teeth come together when you bite or chew. Dentists check it before treatments that change tooth shape, such as crowns or veneers.
The ADA's dental terminology defines occlusion as any contact between the biting or chewing surfaces of the upper and lower teeth. Orthodontics can change the bite by moving teeth, while crowns and veneers change it through their shape. A bite that feels high or uneven after new dental work is worth reporting, since it can usually be adjusted. Bring up any new jaw soreness too.
Why has my jaw started clicking?
Jaw clicking often comes from the joint or the disc inside it moving unevenly. On its own, without pain or locking, it's common and often needs no treatment. Clicking with pain, limited opening or locking can be a sign of a temporomandibular disorder and is worth an exam.
Many TMD symptoms fade on their own, the NIDCR notes. At an exam, the dentist feels the jaw joints and muscles for tenderness, listens for clicking or popping, and checks how freely your jaw moves. Depending on what's found, your dentist may refer you to a physician. Grinding and clenching can add strain, so mention any you notice. Keep a note of when the clicking happens and whether anything makes it worse. That helps the exam.
How is a clicking jaw treated?
Clicking without pain usually doesn't need treatment. When it comes with pain, simple care comes first: soft foods, rest for the jaw, and avoiding gum chewing and wide yawns. If clenching is part of the picture, Dr. Farahnik may suggest a night guard. Experts advise against treatments that change the bite for good.
The NIDCR says evidence for many TMD treatments is limited, so it recommends conservative care and avoiding surgery that alters teeth or bite. Stop using an appliance and call your dentist if it causes pain.
4 questions
What should I know about extractions, visits and financing?
Practical answers about extractions, knocked-out teeth, visit length and paying for care.
What is a tooth extraction?
A tooth extraction is removing a tooth from its socket in the jawbone. It's done when a tooth is too damaged or infected to save, or to make room in the mouth. The area is numbed first. A blood clot then forms in the socket as it heals.
Skip straws for a day, MedlinePlus advises; the suction can pull the clot loose and leave a painful dry socket. Soft foods help while the area heals, and a cold compress on the cheek can ease swelling. Bleeding that's still heavy several hours later should be checked. Ask about replacing the tooth, since gaps can let neighbors shift.
What does tooth avulsion mean?
Tooth avulsion means a tooth has been knocked completely out of its socket. An adult tooth can sometimes be saved if it's handled carefully and put back quickly. Pick it up by the crown, not the root. A knocked-out baby tooth is not put back.
The AAE advises acting quickly and seeing a dentist, ideally within about half an hour. Rinse the tooth with water only, without scrubbing. If it can't go back in, keep it in milk or in your mouth next to your cheek, not in tap water. A tooth out of the mouth for longer can sometimes still be saved. Then call your dentist.
How long does a dental visit take?
It depends on what's being done. Checkups and cleanings are usually shorter visits. Bonding usually takes about half an hour to an hour for each tooth, and in-office whitening usually needs only one visit. Larger treatment, such as crowns or implants, is spread over several visits.
Your first visit includes an exam and any X-rays needed, so it may take longer than later ones. Treatments made in a lab, such as crowns, onlays and porcelain veneers, need a visit to prepare the tooth and another to fit the final piece. Ask how many visits your plan involves and how long each is likely to take, so you can plan your time.
How do dental loans and financing work?
It's a loan from a lender that pays for treatment, subject to credit approval, with terms set by the lender and your credit. Our options run Cherry first, CareCredit second, then Sunbit and in-house financing. The written treatment plan from your exam is what you apply against.
Each lender sets its own terms and shows its own disclosures when you apply, so read them before you agree. Ask the lender what happens if a payment is late. Our financing page lists each option. Compare the options before you apply.
4 questions
What should I know about early decay?
Early decay can be reversed before a cavity forms; a peptide product aimed at those early lesions is covered too.
Can a cavity heal on its own?
Early decay can be stopped or reversed before a hole forms. A cavity that has broken through the enamel can't heal on its own. Fluoride and saliva repair early white-spot damage. Once there's a hole, it needs a filling or other treatment.
The NIDCR describes a white spot as the first sign of mineral loss, when decay can still be reversed with fluoride from toothpaste or from a dentist. If mineral loss continues, the enamel breaks down and a cavity forms. Brushing with fluoride toothpaste, cleaning between teeth and limiting sugary foods help early spots recover. Ask at checkups whether any spots are changing.
Can diet or herbal remedies fix a cavity?
Not once a cavity has formed. Diet helps prevent decay, and early white-spot lesions can remineralize with fluoride and saliva. No herbal or mineral remedy has been shown to rebuild a tooth that already has a hole. Limiting sugars and using fluoride toothpaste are well supported.
The NIDCR recommends brushing twice a day with fluoride toothpaste, cleaning between teeth and limiting sugary drinks and foods high in sugars and starches. Regular checkups catch early spots while they can still be reversed. A review of a peptide treatment for early decay found it may help remineralize enamel, though the evidence was very low certainty. Be cautious with remedies that promise otherwise.
How does peptide treatment for early decay work?
Curodont is a professional product applied to early decay. Its maker says peptides seep into the weakened enamel and form a framework that draws in calcium and phosphate from saliva to rebuild it. It's meant for early lesions, not cavities that already have a hole.
The manufacturer describes the US product, Curodont Repair Fluoride Plus, as designed to treat early-stage caries, including white spot lesions, when traditional prevention has failed.
A JADA review of six trials of the original Curodont Repair found it likely increased arrest of early lesions, and noted that no study used Fluoride Plus.
An earlier review rated the evidence for this kind of treatment as very low certainty, with most trials funded by manufacturers.
What happens during a peptide treatment for early decay?
Curodont is applied by a dental professional to the early lesion in the office, with no drilling. The manufacturer lists it as a professional product for in-office use only. Afterward, you avoid eating, drinking or rinsing for a short time, as instructed.
The manufacturer's instructions say patients shouldn't eat, drink or rinse for 30 minutes after the application.
The maker describes it as designed for early-stage caries, including white spot lesions, rather than cavities that already have a hole.
Ask whether it suits your lesion and how it will be checked at later visits.
Read more
Where can I read more about general dental care?
Our services page shows every treatment we provide in-house, and our financing page covers how payment works. Missing a tooth? Start with dental implants. Every other patient question is on the dental FAQ page.
You'll receive a written treatment plan and fee after your exam.
Insurance: We accept all PPO insurance plans.
Financing: Cherry · CareCredit · Sunbit · In-house financing
Apply with CherryApply with CareCredit
Financing is subject to credit approval.
Everyday question we missed? Phone or text (818) 658-9285; we're open 24/7.

The dentist
About your dentist
Faraz Farahnik, DDS, handles checkups, fillings and root canals as a general dentist; cosmetic and restorative work is the heart of his practice.
- Education
- UCLA, with honors · DDS, USC, 2018
- Practicing
- Practicing dentist since 2018
- Languages
- English · Farsi
Begin
Start with a phone consultation
Unsure what your tooth needs? Begin with a call to (818) 658-9285; the treatment plan comes from an in-person exam.
Learn more about Exams & X-Rays in Encino, where checkups and X-rays share one suite with every other treatment.